Aerobic septic repairs in Waco, TX

When an aerobic system acts up, it's usually one part that quit. We find which one and fix it.

Common repairs on aerobic systems

These are the parts that wear out or break on the kind of systems we work on.

Aerator or air pump failure
The pump is silent, humming without moving air, or the alarm trips. Without air, the tank turns septic and starts to smell.
Pump and float problems
The pump tank fills and doesn't empty, or the pump runs and runs. A stuck or tangled float is a common cause.
Alarm and control panel faults
Alarm sounding, lights out, a tripped breaker, or a timer that's off schedule.
Clogged or broken spray heads and drip lines
Heads that don't pop up, weak spray, a head clipped by the mower, or drip lines that are plugged or cut.
Damaged lids or fittings
Cracked or loose lids, missing screws, broken inlet or outlet fittings.

Signs something's failing

The alarm is sounding

A light, a buzzer or both at the control panel. It's there for a reason.

Backups

Slow drains, gurgling, or water coming back up in the lowest tub or shower.

Odors

A sewage smell at the tank, in the yard or around the spray area.

Standing water

Puddles or soggy ground near the tank or spray heads on a dry day.

What to do first

Before anyone gets there, a few things help.

Don't open the tank yourself. Really.

  • Ease up on water. Hold off on laundry, dishwasher runs and long showers so less goes into the system.
  • Leave the power on. Many panels have a button that silences the alarm. Silencing it is fine. Shutting the system off at the breaker can make things worse.
  • Keep people and pets back. Stay away from pooled water, wet spots and open or cracked lids.
  • Write down what you see. Which light is on, whether the air pump is running, where the water is. It helps us diagnose.
  • Call us. (921) 572-4055

What a repair visit looks like

  1. 1

    You tell us the symptoms

    Alarm, smell, water, noise. Whatever you noticed and when it started.

  2. 2

    We diagnose

    We check the panel, air pump, pump and floats, and the spray or drip area until we find what failed.

  3. 3

    We explain the fix

    You hear what broke and what fixing it involves before the work starts.

  4. 4

    We repair and test

    Then we run the system to make sure the part does its job.

Common questions

What if it's an emergency?

Some emergency repairs (tank lids, risers and caps, inlet or outlet devices, disinfection devices, drip tubing, solid lines) can be made before a permit, but they must be reported to the permitting authority in writing within 72 hours of starting. Call us and tell us what's happening.

Do I need a permit to replace my septic tank?

Yes. In Texas, replacing a tank is a repair that needs a permit for the whole system, from your local permitting authority. Check with them for your property.

I got a notice about my system. How long do I have?

Your permitting authority sets the deadline to fix a malfunctioning system: 30, 20 or 10 days after notice, depending on earlier notices. Read the notice carefully, ask them if anything's unclear, and call us early.

More answers on the FAQ page.

System acting up?

Call and tell us what it's doing. The sooner we hear about it, the sooner it's fixed.

Or send a service request